*FREE SHIPPING
Ships in 3-4 weeks.
This listing is for an end-user who currently have a K-Pro compatible K-series ECU (see link below). You will be emailed a shipping label after your purchase to send in your ECU to us. Once received, we will ship your ECU to Hondata for K-Pro installation. Once the K-Pro job is completed, your ECU will be shipped back to you.
Click HERE for a list of K-Pro compatible K-series ECU's.
Please download, print, and completely fill out the 2nd page of Hondata's K-Pro Order Form and send it with your ECU to us. Filling out this form will speed up the process on our end. Click HERE for the Hondata K-Pro order form.
The K-Series Programmable ECU (K-Pro) consists of a hardware modification to any K-Series ECU, plus Windows software which allows you to re-program the ECU and datalog sensors.
Features
- Fits inside the ECU
- Designed and assembled in USA
- USB connection for speed and compatibility
- Kmanager Windows based software for parameter & table editing, calibration uploading and datalogging.
- Many built in calibrations for common engine combinations
- Built in datalogging to a laptop
- On board datalogging memory (8 MB memory, 10-215 minutes datalogging)
- Adjustment for different sized injectors, with overall fuel trim.
- Configurable for any MAP sensor (to 5 Bar and above)
- TPS based table lookup for ITBs
- Engine protection from lean air fuel ratios, over boost and low oil/fuel pressure.
- Expanded fuel and ignition tables, both in rpm and load, to 60 lbs boost and 11,000 rpm (these are not the upper limits)
- Launch control with anti-lag
- Three multi purpose outputs for nitrous control or similar.
- Supports lambda tracing from the stock wideband o2 or aftermarket wideband.
- PWM output for boost control
- Bluetooth support and Hondata Mobile app.
- Ethanol sensor input for flex fuel capability.
- Alternate speed sensor input.
- Dash output serial & CAN streams.
- Live tuning and auto tune.
KManager Tuning Features
- High and low speed 16 x 20 ignition and fuel tables at multiple cam angles for correct VTEC and VTC tuning.
- Injector size fuel trim
- Fuel trim for starting, throttle tip in and individual cylinder trim
- Rev limiter with fuel cut
- Launch control with anti-lag
- Adjustable VTEC window with load and throttle control
- Adjustable idle speed
- MAP sensor type and calibration
- Adjustable boost cut with hot and cold settings
- Closed loop control
- Air temperature compensation
- Fuel and ignition correction based on gear
- Closed loop
- Three general purpose outputs for nitrous control, quad boost control or similar
- On board datalogging trigger conditions
- Kmanager can be downloaded HERE
*KPro for an 05-06 RSX use will include an ecu jumper harness necessary to use a KPro in an 05-06 RSX at an additional cost.
