The Honda FK8 Type R Eventuri intake is the result of extensive design iteration through dyno testing and flow analysis. It was developed to achieve two objectives – 1) Maintain low inlet temperatures. 2) De-restrict the turbo inlet path. The first objective was met by enclosing the filter inside a carbon airbox and using the stock seal against the hood to block out the heat soak from the engine. Since the intake sits directly behind the radiator it is crucial that the filter is not exposed which would result in a loss of power through high IAT. The second objective was met by removing the flexible tubing and optimizing the inlet path with a Venturi stack connected directly to the filter. Furthermore, we added a second inlet to the airbox with a scoop pulling in air from the inner wing area. This almost doubles the total cross sectional area through which the turbo can draw from as compared with the single entry on the stock system. The Eventuri carbon airbox enclosure has been designed to maximize the use of the available volume and block all sources of heat. The resulting performance gains and aesthetics are industry leading for the FK8 Type R.
The standard airbox draws in air from a single entry duct behind the front bumper. The size of this inlet is very small at approximately 35cm^2. The demand from the turbo results in this opening becoming a restriction. However, simply opening the filter inside the engine bay is detrimental since the filter position is directly behind the radiator and once the engine warms up - the filter will become quickly saturated with heat. Our intake system solves this issue by keeping the filter enclosed inside an airbox and adding a secondary feed which opens the inlet area by another 28cm^2. This coupled with our Venturi Filter stack for smooth flow results in an immediate gain across the entire RPM range of 14-20hp. The dyno graph below shows the comparison between the stock airbox and the Eventuri intake system on a standard car with standard map and exhaust. Dyno runs were done back to back on the same day and with the hood closed. The following dyno results are from independent tuners around the World:
Patented Eventuri filter housing design
From scoop to duct to housing to inlet tubing - by utilizing organic shapes, Eventuri invests a great deal of time and effort in providing a smooth path for the airflow to follow. Hence ensuring maximum efficiency of the system
Due to the effects COVID has had on certain overseas manufacturers of aftermarket parts, product restock times have taken a BIG HIT, thus longer wait times have been enforced upon us affecting our order fulfillment performance.
Google may show we have products in stock and ready to ship in 1-5 business days, but that is currently afalse positive. Please contact us directly for stock check and legitimate ship times.
Please, exercise patience with us during these long wait times as we are doing our best to fulfill all customer orders.